Macro «Checking the signals» for «StalCraft»

The signal search engine, which starts checking 1 time when the detector is opened, checks for 0.5 seconds whether there is a signal, if yes -> starts the search and collapses the sac, after 12 seconds it unfolds, and switches the search to manual mode, if the signal was not detected, then the sac simply closes. For real-time pharma signals, it probably won't work, it works better with parallel pharma locations (conditionally I went to the master pd, farm the resources + sometimes you open the alarm box to loot a joke), because the macro cannot compete with cyclic checking of the sac every second

Screen resolution: 2560 x 1440
______________________________________________________________________________________________
It only works for SAK-1, it must be switched to V
In line 5, you need to specify the position of the wide search
In lines 11 and 12, you need to specify the pixel of the light bulb indicating the presence of a signal
In lines 15 and 29, the position of the start/end lever of the search
In line 34, specify the position of the search signal button ( under the light bulb )