Macro «TopPilking» for «Russian Fishing 4»

For correct work, please read to the end! 

The macro is designed for a resolution of 1920x1080!
For the macro to work correctly, you need to stand on the bow of the boat and direct the area of the fish icon towards the black parts of the boat!
Also, for the correct operation of the macro, you do not need to change the color values in the lines!
The macro is not configured to stop when filling the tank!(you need to take into account the time of your absence in advance! If necessary, turn off the PC automatically)  
The macro is designed to simplify your actions!
You can comfortably use car fishing on small fish!
When catching large fish, you need to periodically stay near the PC, so that in case of unwinding, replace the macro!   

Setting up a macro! 

To set up auto fishing, you need to get into the fishing spot!
Now we will need to measure the time of lowering your bait to the desired depth!
Measurement is performed from pressing the paintwork during casting to pressing the paintwork at the depth you need!(This can be done on a stopwatch!)
After we have measured the time, we multiply the value in seconds by 1000 in the calculator! (20x1000=20000)
Now divide the resulting number by 200 (20000÷200=100)!
Replace the resulting number in line 7!  
We have set the depth value! 

Rewinding after lowering! 
We need to change the time in (ms) in line No. 9 to the time we need (The time that the coil will wind up after lowering to the depth / bottom we need)! 

Pilking! 
Pilking is regulated by line No. 17 (By default pilking is with the Shift key pressed)!
The number of repetitions affects the time of pressing the PCM (The time at which you will raise the fishing rod)!
If you do not need to press the Shift key, delete the lines (No. 13 No. 19)!
Line No. 22 is responsible for the waiting time between presses of the RMB! 

Vyvazhivanie! 
By default, the display stands with the keys pressed (LMB+PCM+Shift)!
If any key is not needed, you can delete it! (PCM No.29 No.43) (Shift No. 31 No.41)

Quick Exit/Late Arrival!
Pilking continues after a quick descent!
A late gathering can be set up! To set up a late exit, we need line No. 77! 
To set up, you need to lower the bait to the depth in which the fishing takes place! (Do it manually!)
Now we need a screenshot of the screen! (The screenshot is set as desktop wallpaper!)
We make settings on the desktop! 
Now we set the coordinates in line No. 77! (The coordinates must be set on the icon for filling the bobbin with a fishing line! Put 1 pixel higher than the current value of the fishing line!)

Fish! 
By default, the macro takes only the test fish into the tank! 
If you need to take all the fish, you need to delete lines from No. 44 to No.56 Inclusive!

Information
PC is your computer! 
The fish icon is a bite indicator!
Black parts of the boat-The surface of the boat is black (Floor)
Quick Exit-Exit immediately after pressing the LMB! 
Late Gathering-Gathering after some time of hanging out!
A small fish is a fish that cannot unwind your line for a long time in the 29th friction!



If you need any help, write to the BOS on the website!
https://keyran.net/forum/profile/38203-u1trateam/